100% of Chinese New-Build Cartridges Fail European Tests

100% of Chinese New-Build Cartridges Fail European Tests

Testing commissioned by ETIRA states European reman cartridges are safe, but new-build products from China are toxic and should be cut

The European Toner and Ink Remanufacturers Association (ETIRA) is issuing a warning over non-OEM, new-build cartridges coming into the European Union from China.

The association supports the responsible remanufacturing of printer cartridges in Europe as being the safe aftermarket choice for printer cartridges.

As part of its charter, ETIRA recently purchased three non-OEM new-build toner cartridges on Amazon and commissioned the testing of these products by Germany’s expert LGA test centre. At the same time, five further tests were commissioned by other industry players concerned about product safety.

According to ETIRA, the toner used in all eight non-OEM, new-build cartridges failed the LGA emissions tests. There were multiple reasons for the failures. No brand names were identified and you can scroll down to the results.

At the same time, tests were conducted on two toners widely used by European remanufacturers. Both toners passed the LGA emissions test. Again, no brand names, sources or identifying marks were identified and you can scroll down to the results.

LGA refers to “Landes Gewerbe Anstalt Bayern” and the LGA seal of approval is available to many types of products that meet certain minimum criteria in the field of safety. Toner cartridges can be tested against the LGA test protocol for toners. If your toner passes, you can say your toner is  “LGA-schadstoffgeprüft”. It is a test for hazardous compounds. The LGA test is done by the worldwide well-known TuV Rheinland Instititute. They did the tests for ETIRA.

Chinese New-Build Cartridges Fail Tests rtmworld Javier Martinez ETIRAETIRA’s message appears to be quite simple: locally remanufactured cartridges are safe, imported new-built cartridges are not and “are a threat to our health and the environment.” Javier Martinez (pictured), president of ETIRA said, “These tests show that very often it is dangerous to buy newbuild non-OEM cartridges: by offering products containing dirty toners, traders are playing with the health of their customers.”

Excessive Levels

According to the ETIRA report, the range of failures in the new-build cartridges includes excessive levels of cobalt, benzene and naphthalene.

Four cartridges had levels ranging from 37 to 44 mg/kg of cobalt. According to the European Chemicals Agency (ECHA), this may cause an allergic skin reaction, allergy or asthma symptoms or breathing difficulties if inhaled.

Benzene was also detected at a level of 0.9 mg/kg, 157% above the LGA threshold of 0.35 mg/kg. Benzene may be fatal if swallowed or enters the body’s airways, may cause genetic defects, may cause cancer and damage to organs through prolonged or repeated exposure. It is a highly flammable liquid and vapour causes serious eye irritation and causes skin irritation.

Naphthalene was present in seven of the eight tested cartridges at a level of between 3.8 and 7.5 mg/kg, they were between 280% and 650% above the LGA test threshold of 1.0 mg/kg. This substance is harmful if swallowed and is suspected of causing cancer.

One test cartridge contained 86 mg/kg of Bis(2-methoxyethyl) ether, which is more than 8500% above the LGA test threshold of 1.0 mg/kg. This substance may cause infertility or affect an unborn child and is a flammable liquid and vapour.

In the past, toner powders extensively used in the European remanufacturing sector have been tested by the LGA and they easily passed this stringent emissions test.